Acrylic Pen Blank Display with CNC

April 13, 2017

Check out the Video! Please Subscribe! Hybrid Blanks As many of you know, I have been getting into making my own hybrid blanks by stabilizing otherwise worthless wood using with my vacuum chamber and casting with […]

Shop Tour – 2017

February 16, 2017

Check out the Video! Please SUBSCRIBE!  Even though I didn’t accomplish most of what I planned for 2016 AKA The Year of Organization, I was still very surprised by how different my shop looks. Almost […]

Jointer Knife Blade Setting Jig – MM#04

February 2, 2017

Check out the Video: If you’re not already subscribed, DO IT! Installing new blades in a jointer can be tedious and.. just a crappy experience overall. If you make the slightest mistake you’ll end up […]

Make a Pressure Pot with Accessories for Casting

December 8, 2016

As promised, I’m going to continue down the road of stabilizing and casting “worthless” wood by explaining how I built my pressure pot and accessories. If you missed out on the previous article where I […]

MM#03 – Bandsaw Circle Cutting Jig

November 3, 2016

Check out the video Please Subscribe to catch future content! Ever need to cut a perfect circle? I recently did while making the tray for my pressure pot when casting blanks for my Hybrid Marking […]

Universal Clamp Rack

September 22, 2016

  My clamp collection has been growing for quite some time and I’ve never really had a good place to store them. They’ve moved quite a few times and the latest location was in the […]

Make a Hybrid Marking Knife

August 25, 2016

If you spend as much time watching my Instagram feed as I do, you’ll see TONS of cool wood/acrylic hybrid blanks. After seeing my first marking knife with hybrid scales, it was on my to-do […]

How to Make a Vacuum Chamber

August 4, 2016

Why a vacuum chamber? Vacuum chambers can be used for many things but three primary uses come to mind: stabilizing wood, degassing silicone and Awesome experiments. There are many other uses but the only three […]

Monkey Moment #03 – Handscrew Vise

June 9, 2016

Need to do some hand tool work but don’t have a proper work bench and vise? Out steps the wooden handscrew clamp to save the day! I’ve always coveted those with a traditional workbench and it has […]

Make a Tapering Jig

May 27, 2016

Every now and then I run into a cut that should be done with a tapering jig but since I’ve never had one, I generally get it done with some creative clamping. I finally ordered […]

1 2 3